## Reinforcement Learning part 4: Combining egocentric and allocentric

Alright, in my last post on RL we looked at egocentric learning and what that is. We also saw that both ego and allocentric learning have their strong points, and they compliment each other. So, some combination of these two approaches seems like a good idea. In this post we’re going to look at combining the output from these two kinds of learners and see the strengths of different weightings. Per usual, all the code from this post is up on my Github.

Combining allocentric and egocentric approaches

There are a few different ways that come to mind that we could combine these two learning styles. In each of these cases the overall setup is that we’re going to run two learning systems, one that is allocentric and one that is egocentric, combine their action value mappings for the current state in some way, and then decide which action to take based on their combined output. So here are several possible ways to combine the outputs:

• Only use allocentric
• Only use egocentric
• Average the mappings
• Dynamically change weights

There are, of course, many more ways to weight these systems, but these are some basic ones and they’re what we’re going to look at here.

For testing each of these these different setups we are going to run the mouse on a map for a set amount of time, measure the wins, accidental deaths, and intentional deaths, and then gather statistics (mean value and confidence intervals) across 10 trials.

A side note: The rate of exploration (epsilon value) starts out at .1 and is decreased by half every 100,000 simulation time step, so there are a number of jumps where you see the number of wins go up every 100,000, and that’s an artifact of the rate of exploration dropping (i.e. increasing your exploitation of what you already know about the world).

OK, we’re going to do this across 3 different maps, where the size and complexity increases with each map.

Map 1: the basic cliff map (which should look familiar):

Map 2: a middlesized map with several areas that are identical for the egocentric state:

and Map 3: a pretty large map with even more ambiguous areas:

Expectations

Now, what we expect from our learning systems is that the egocentric learner with have very few ‘suicide’ deaths, where it’s slow to learn that jumping off a cliff is a terrible idea. But on the flip side of that, since we’re going to set the `gamma` value of the egocentric learner to 0, (which means that it doesn’t incorporate anything other than the immediate reward into it’s learning, as discussed in the previous post), we expect that it will only rarely find the goal. Also, as the map gets larger, we expect that the goal will be found less and less, as it will have to randomly stumble around avoiding cliffs until it ends up in sight of the cheese.

From the allocentric learner we expect the death rate to be much higher than the egocentric learner, but we also expect the success rate to be significantly higher, as it will be able to identify how to move based on its current `(x,y)` position, rather than based on its immediate surroundings. As the map gets larger though, we expect the number of deaths to be larger, since there is no transfer of knowledge that jumping off a cliff in this position is as bad as jumping off a cliff in that position.

Alright! Let’s get to it!

Results

Only use allocentric

Not much to explain about this, the mouse is going to be learning Q-values where each state is its `(x,y)` position on the map. The bigger the map, the more deaths we expect this learner to have. So, here are the results:

Alright, so one of the most salient things in these plots is the stepping up of the number of wins at each of the 100,000 marks. Again, this is due to a transfer from exploration to exploitation of what’s already been learned as the epsilon value is decreased. And, also, as the map gets bigger, the number of wins takes longer to max out, but it’s pretty interesting how consistent the learning is (as seen by the very small confidence intervals on the runs) across trials given the random exploration.
Another point of note is that the number of deaths goes way up with the size of the map, as expected.

Only use egocentric

Again, this one is another straightforward case, the mouse is going to be learning Q-values where each state is its set of immediate neighbors (e.g. cliff to the right, cheese in front, empty cells left and behind). Here we expect that it will have a minimal number of deaths (not much more than a death for each of the situations it can encounter a cliff or cliffs in), and that the number of successes should be pretty low and very inconsistent, since it will be entirely based on randomly stumbling into a spot near the cheese while avoiding cliffs. Additionally, we expect the number of results to drop with increases in the size of the map. The results are below:

The results are as expected, lots of variation in the wins number, low suicide numbers, and the number of wins decreases with map sizes. Something that’s kind of interesting here is that you don’t see any real effects of the `epsilon` value as it decreases as you do in the egocentric case. I believe that this is because it achieves a balance of exploration that throws you off a cliff and exploration that moves you into the vicinity of the cheese. So it’s dying less when the exploration rate drops, but it also has less chance of reaching the cheese now. That’s my guess, at least. Alright! Next.

Average the allo and ego Q-values

Here we’re going to do the most basic combination of the allo and ego-centric learning possible. Both learners will run simultaneously, and generate a set of Q-values over the set of possible actions at each state, and we’ll average the output of both then choose the max Q-value to choose which action is taken. The hope here is that the ego-centric learner will very quickly learn not to jump off cliffs, and the allocentric learner will more slowly learn how to move in the map to get cheese. So we expect few deaths and more wins. Let’s look at the results:

Damn! So now we have the same (or at least very similar) win rate as the allocentric learner (awesome), and the same death rate as the egocentric learner (also awesome)! We have achieved some sort of super-human…or, super-mouse mouse. A super mouse. This is really cool, it tells us that these two systems really do compliment each other, and that it can be incredibly straightforward to implement a combination of the two.

Dynamic weighting

Here we’ll look at the results from a variation of an algorithm I’ve implemented based on this really interesting paper by Dr. Sakya Dasgupta et al where they got a lot of really neat results implemented on a little robot critter. We can’t quite use the algorithm as presented here for a couple of reasons.

In the paper, the authors design the algorithm for weighting the output from classical conditioning and operant conditioning systems. I’m taking these to be pretty close to analogous to an ego-centric learner (with no lookahead) and an allo-centric learner, respectively. The idea being that classical conditioning is based on immediate associations developed from rewards, and operant conditioning allows the longer-term associations to be formed. Specifically, in operant you learn to associate the conditioned stimulus with the unconditioned stimulus, which leads to a a conditioned response. The classic example being the dog salivating when hearing the bell, because it knows food is coming. Here the allocentric learner is doing a similar thing, using a look-ahead to start associating stimuli (in this case different states) with a reward or punishment. So, this could be a wildly inappropriate application of this algorithm, and the comparison definitely warrants further discussion.

The more immediate reason for varying the algorithm is because the output of their system is a continuous ‘left/right’ decision, and the output from the mouse here is a discrete ‘left/right/up/down’ decision. So the systems in the paper output a number from -1 to 1 that indicates which way to turn, and this is used in the update. So the algorithm needs to be changed up a little.

First, here’s the original algorithm:

`weight_allo += eta * reward * [output_allo - filtered_output_allo] * output_ego`
`weight_ego += eta * reward * [output_ego - filtered_output_ego] * output_allo`

where `eta` is the learning rate, `reward` is the immediate reward of the state you move into, `output_` is the -1 to 1 value from the learners, and `filtered_output_` is a low pass filtered version of the output. So the first part is standard, learning rate multiplied by the reward, and then the part inside the brackets is calculating a derivative of the output of the learners. This is again standard, did your learner change? If it did change and a reward was received, then increase the weight of that learner. The last term, which multiplies it all by the output from the other learner is for scaling.

And then normalize the weights relative to each other, and it isn’t explicitly stated in the paper, but also lower bound the weights at 0. The reason you need to do this lower bounding is that if you don’t, then when you use the weight as a gain on the learner output all of the Q-values are inverted! Not easy to recover from that.

The dynamic weighting equations that I’m using are:

`weight_allo += eta * reward * dq_allo * output_ego`
`weight_ego += eta * reward * dq_ego * output_allo`

and then lower bound at 0 and normalize.

There is still a lot in these equations that I’m unsure about (for example scaling by the output of the other learner instead of by the other weight, and how the signs of the reward, derivative, and other learner output all interact), but I’m going to leave delving into that for a future post, since this one is getting long already and I don’t have a full understanding of it yet. But! I have enough of an understanding to implement the above and run simulations! Here are the results:

I should note that the learning rate here for the weight equations is `5e-4`. When you decrease this weight you get improved performance, but the best I’ve gotten is just reducing it to a point that it’s pretty much constantly using .5 for each. And that’s boring.

Alright, comparing to basic averaging here we notice that we have about the same performance for the small map, and then on the bigger maps significantly worse performance and also a lot more variability between runs. Basically what seems to happen is that the system quickly identifies that the allocentric learner should not have control at the beginning, because it keeps killing the mouse, and then it takes a lot longer to start handing control back over from the egocentric learner to the allocentric learner.

Conclusions

Alright, so that’s all! Bottom line is that allocentric and egocentric learning really work well together, and basic averaging of these gives great results. Whether this is the best means of combining them is unclear, however. This was just a really basic test of different combinations, and there is some really neat work looking at different ways to do it. It’s super fun to mess around with and there’s a ton of room for experimentation. In the code up on my Github, the code for weight learning can be found by searching for `weight_learning`. If anyone plays around and figures out a kick-ass dynamic weighting algorithm please pass it along!

## 5 thoughts on “Reinforcement Learning part 4: Combining egocentric and allocentric”

1. Taeyoung says:

Reblogged this on Taeyoung Kim and commented:
Thing to learn

2. I think the value function could be modeled as a small neural network without hidden layers and with a linear activation function. You could encode the position of the mouse as a one-hot vector with as many elements as there are cells (i.e. the number of unique position the mouse can be on), where the element corresponding to the cell the mouse is in is one and all other elements are zero. Likewise, the egocentric “situation” (i.e. the combination of neighbor cells) can also be encoded as a one-hot vector with equally many elements as there are unique situations (which I guess would be 3^8 = 6,561 if we allow several cells to contain cheese).

The benefit of thinking of the value function in this way is that we can co-learn the Q-values for the allocentric and the egocentric learners (which simplified would correspond to the weights in this network) in a way so that they complement each other optimally.

This minimal neural network would be similar to the wide and deep learning concept (see https://www.youtube.com/watch?v=NV1tkZ9Lq48) in which the network consists of two “modules”, where the wide module can memorize very well but can’t generalize at all (analogous to the allocentric learner), and the deep module can generalize well but can’t remember specific details very well (analogous to the egocentric learner), although your “deep” module only has the depth one (i.e. no hidden layers).

• travisdewolf says:

Hi Kristofer, for sure there are a bunch of different ways that this problem can be approached, and a ton of different methods out there. Please keep me posted on any implementations / results!