We’ve been running a reading group on Reinforcement Learning (RL) in my lab the last couple of months, and recently we’ve been looking at a very entertaining simulation for testing RL strategies, ye’ old cat vs mouse paradigm. There are a number of different RL methods you can use / play with in that tutorial, but for this I’m only going to talk about Q-learning. The code implementation I’ll be using is all in Python, and the original code comes from one of our resident post-docs, Terry Stewart, and can be garnered from his online RL tutorial. The code I modify here is based off of Terry’s code and modified by Eric Hunsberger, another PhD student in my lab. I’ll talk more about how it’s been modified in another post.
For those unfamiliar, the basic gist of Q-learning is that you have a representation of the environmental states
s, and possible actions in those states
a, and you learn the value of each of those actions in each of those states. Intuitively, this value,
Q, is referred to as the state-action value. So in Q-learning you start by setting all your state-action values to 0 (this isn’t always the case, but in this simple implementation it will be), and you go around and explore the state-action space. After you try an action in a state, you evaluate the state that it has lead to. If it has lead to an undesirable outcome you reduce the
Q value (or weight) of that action from that state so that other actions will have a greater value and be chosen instead the next time you’re in that state. Similarly, if you’re rewarded for taking a particular action, the weight of that action for that state is increased, so you’re more likely to choose it again the next time you’re in that state. Importantly, when you update
Q, you’re updating it for the previous state-action combination. You can only update
Q after you’ve seen what results.
Let’s look at an example in the cat vs mouse case, where you are the mouse. You were in the state where the cat was in front of you, and you chose to go forward into the cat. This caused you to get eaten, so now reduce the weight of that action for that state, so that the next time the cat is in front of you you won’t choose to go forward you might choose to go to the side or away from the cat instead (you are a mouse with respawning powers). Note that this doesn’t reduce the value of moving forward when there is no cat in front of you, the value for ‘move forward’ is only reduced in the situation that there’s a cat in front of you. In the opposite case, if there’s cheese in front of you and you choose ‘move forward’ you get rewarded. So now the next time you’re in the situation (state) that there’s cheese in front of you, the action ‘move forward’ is more likely to be chosen, because last time you chose it you were rewarded.
Now this system, as is, gives you no foresight further than one time step. Not incredibly useful and clearly too limited to be a real strategy employed in biological systems. Something that we can do to make this more useful is include a look-ahead value. The look-ahead works as follows. When we’re updating a given
Q value for the state-action combination we just experienced, we do a search over all the
Q values for the state the we ended up in. We find the maximum state-action value in this state, and incorporate that into our update of the
Q value representing the state-action combination we just experienced.
For example, we’re a mouse again. Our state is that cheese is one step ahead, and we haven’t learned anything yet (blank value in the action box represents 0). So we randomly choose an action and we happen to choose ‘move forward’.
Now, in this state (we are on top of cheese) we are rewarded, and so we go back and update the
Q value for the state ‘cheese is one step ahead’ and the action ‘move forward’ and increase the value of ‘move forward’ for that state.
Now let’s say the cheese is moved and we’re moving around again, now we’re in the state ‘cheese is two steps ahead’, and we make a move and end up in the state ‘cheese is one step ahead’.
Now when we are updating the
Q value for the previous state-action combination we look at all the
Q values for the state ‘cheese is one step ahead’. We see that one of these values is high (this being for the action ‘move forward’) and this value is incorporated in the update of the previous state-action combination.
Specifically we’re updating the previous state-action value using the equation:
Q(s, a) += alpha * (reward(s,a) + max(Q(s') - Q(s,a)) where
s is the previous state,
a is the previous action,
s' is the current state, and
alpha is the discount factor (set to .5 here).
Intuitively, the change in the Q-value for performing action
a in state
s is the difference between the actual reward (
reward(s,a) + max(Q(s'))) and the expected reward (
Q(s,a)) multiplied by a learning rate,
alpha. You can think of this as a kind of PD control, driving your system to the target, which is in this case the correct Q-value.
Here, we evaluate the reward of moving ahead when the cheese is two steps ahead as the reward for moving into that state (0), plus the reward of the best action from that state (moving into the cheese +50), minus the expected value of that state (0), multiplied by our learning rate (.5) = +25.
In the most straightforward implementation of Q-learning, state-action values are stored in a look-up table. So we have a giant table, which is size
N x M, where
N is the number of different possible states, and
M is the number of different possible actions. So then at decision time we simply go to that table, look up the corresponding action values for that state, and choose the maximum, in equation form:
def choose_action(self, state): q = [self.getQ(state, a) for a in self.actions] maxQ = max(q) action = self.actions[maxQ] return action
Almost. There are a couple of additional things we need to add. First, we need to cover the case where there are several actions that all have the same value. So to do that, if there are several with the same value, randomly choose one of them.
def choose_action(self, state): q = [self.getQ(state, a) for a in self.actions] maxQ = max(q) count = q.count(maxQ) if count > 1: best = [i for i in range(len(self.actions)) if q[i] == maxQ] i = random.choice(best) else: i = q.index(maxQ) action = self.actions[i] return action
This helps us out of that situation, but now if we ever happen upon a decent option, we’ll always choose that one in the future, even if there is a way better option available. To overcome this, we’re going to need to introduce exploration. The standard way to get exploration is to introduce an additional term,
epsilon. We then randomly generate a value, and if that value is less than
epsilon, a random action is chosen, instead of following our normal tactic of choosing the max
def choose_action(self, state): if random.random() < self.epsilon: # exploration action = random.choice(self.actions) else: q = [self.getQ(state, a) for a in self.actions] maxQ = max(q) count = q.count(maxQ) if count > 1: best = [i for i in range(len(self.actions)) if q[i] == maxQ] i = random.choice(best) else: i = q.index(maxQ) action = self.actions[i] return action
The problem now is that we even after we’ve explored all the options and we know for sure the best option, we still sometimes choose a random action; the exploration doesn’t turn off. There are a number of ways to overcome this, most involving manually adjusting
epsilon as the mouse learns, so that it explores less and less as time passes and it has presumably learned the best actions for the majority of situations. I’m not a big fan of this, so instead I’ve implemented exploration the following way: If the randomly generated value is less than
epsilon, then randomly add values to the
Q values for this state, scaled by the maximum
Q value of this state. In this way, exploration is added, but you’re still using your learned
Q values as a basis for choosing your action, rather than just randomly choosing an action completely at random.
def choose_action(self, state): q = [self.getQ(state, a) for a in self.actions] maxQ = max(q) if random.random() 1: best = [i for i in range(len(self.actions)) if q[i] == maxQ] i = random.choice(best) else: i = q.index(maxQ) action = self.actions[i] return action
Very pleasingly, you get results comparable to the case where you perform lots of learning and then set
epsilon = 0 to turn off random movements. Let’s look at them!
So here, the simulation is set up such that there is a mouse, cheese, and a cat all inside a room. The mouse then learns over a number of trials to avoid the cat and get the cheese. Printing out the results after every 1,000 time steps, for the standard learning case where you reduce
epsilon as you learn the results are:
10000, e: 0.09, W: 44, L: 778 20000, e: 0.08, W: 39, L: 617 30000, e: 0.07, W: 47, L: 437 40000, e: 0.06, W: 33, L: 376 50000, e: 0.05, W: 35, L: 316 60000, e: 0.04, W: 36, L: 285 70000, e: 0.03, W: 33, L: 255 80000, e: 0.02, W: 31, L: 179 90000, e: 0.01, W: 35, L: 152 100000, e: 0.00, W: 44, L: 130 110000, e: 0.00, W: 28, L: 90 120000, e: 0.00, W: 17, L: 65 130000, e: 0.00, W: 40, L: 117 140000, e: 0.00, W: 56, L: 86 150000, e: 0.00, W: 37, L: 77
For comparison now, here are the results when
epsilon is not reduced in the standard exploration case:
10000, e: 0.10, W: 53, L: 836 20000, e: 0.10, W: 69, L: 623 30000, e: 0.10, W: 33, L: 452 40000, e: 0.10, W: 32, L: 408 50000, e: 0.10, W: 57, L: 397 60000, e: 0.10, W: 41, L: 326 70000, e: 0.10, W: 40, L: 317 80000, e: 0.10, W: 47, L: 341 90000, e: 0.10, W: 47, L: 309 100000, e: 0.10, W: 54, L: 251 110000, e: 0.10, W: 35, L: 278 120000, e: 0.10, W: 61, L: 278 130000, e: 0.10, W: 45, L: 295 140000, e: 0.10, W: 67, L: 283 150000, e: 0.10, W: 50, L: 304
As you can see, the performance now converges around 300, instead of 100. Not great.
Now here are the results from the alternative implementation of exploration, where
epsilon is held constant:
10000, e: 0.10, W: 65, L: 805 20000, e: 0.10, W: 36, L: 516 30000, e: 0.10, W: 50, L: 417 40000, e: 0.10, W: 38, L: 310 50000, e: 0.10, W: 39, L: 247 60000, e: 0.10, W: 31, L: 225 70000, e: 0.10, W: 23, L: 181 80000, e: 0.10, W: 34, L: 159 90000, e: 0.10, W: 36, L: 137 100000, e: 0.10, W: 35, L: 138 110000, e: 0.10, W: 42, L: 136 120000, e: 0.10, W: 24, L: 99 130000, e: 0.10, W: 52, L: 106 140000, e: 0.10, W: 22, L: 88 150000, e: 0.10, W: 29, L: 101
And again we get that nice convergence to 100, but this time without having to manually modify
epsilon. Which is pretty baller.
And that’s it! There is of course lots and lots of other facets of exploration to discuss, but this is just a brief discussion. If you’d like the code for the cat vs mouse and the alternative exploration you can access them at my github: Cat vs mouse – exploration.
To alternate between the different types of exploration, change the
import statement at the top of the
egoMouseLook.py to be either
import qlearn for the standard exploration method, or
import qlearn_mod_random as qlearn to test the alternative method. To have
epsilon reduce in value as time goes, you can uncomment the lines 142-145.